oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2010 oscilent controlled document ordering code / part number product description 863-rf433.92m-a remote control, rf saw filter specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency performance notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 863-rf433.92m-a january 2010 rev a remote control, rf saw filter product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit source and load impedance: 50 ? pin description a, c, d, f, g, h ground b in e out
oscilent part number 863-rf433.92m-a january 2010 rev a remote control, rf saw filter product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -40 - +85 storage temperature range c -40 - +85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 433.92 - insertion loss within 433.80 ~ 434.12 mhz db - 1.9 2.5 pass band ripple within 433.76 ~ 434.16 mhz db - 1.0 2.0 relative attenuation 10.0 ~ 414.0 mhz db 45 50 - 414.0 ~ 428.0 mhz db 35 45 - 428.0 ~ 432.92 mhz db 15 20 - 434.92 ~ 442.0 mhz db 10 15 - 442.0 ~ 550.0 mhz db 25 32 - 550.0 ~ 1000.0 mhz db 45 50 -
oscilent part number 863-rf433.92m-a january 2010 rev a remote control, rf saw filter product specification p. 3 www.oscilent.com frequency performance
|